All Purpose Masonry and Concrete Cleaner - Masonry Defender
136
product-template-default,single,single-product,postid-16273,theme-bridge,bridge-core-1.0.5,woocommerce,woocommerce-page,woocommerce-no-js,ajax_fade,page_not_loaded,,columns-4,qode-theme-ver-18.1,qode-theme-bridge,qode_header_in_grid,wpb-js-composer js-comp-ver-6.0.2,vc_responsive

Products

All Purpose Masonry and Concrete Cleaner

MasonryDefender® All-Purpose Masonry & Concrete Cleaner cleans most exterior, above-grade concrete surfaces including residential driveways, sidewalks, patios, garage floors, pavers, and more. MasonryDefender® All-Purpose Masonry & Concrete Cleaner is a powdered concentrate that safely cleans and restores masonry and concrete surfaces. It removes dirt, grime, and stains caused by mold and mildew.

 

This product is recommended for surface preparation prior to application of MasonryDefender Concrete Driveway Sealer, MasonryDefender Garage Floor Sealer, MasonryDefender Patio Paver Sealer, and MasonryDefender Interior/Exterior Brick Sealer.

APPLICATION

STEP 1: MIX
Mix 1 cup (8 oz.) MasonryDefender All Purpose
Masonry & Concrete Cleaner powdered concentrate
with each gallon of water. Mix with water and stir
thoroughly until powder is mostly dissolved. Powder
dissolves faster in warm water. Solution should be
used within 3 hours of mixing.

STEP 2: APPLY
Dampen surface with water before application. Apply
MasonryDefender All Purpose Masonry & Concrete
Cleaner solution with a pump-up garden sprayer. To
prevent undissolved granules from clogging the
sprayer nozzle, use a paint strainer sock when
pouring cleaning solution into sprayer. Let solution
stand approximately 20-30 minutes, keeping area
wet with additional cleaning solution.

STEP 3: RINSE
Rinse thoroughly with a pressure washer. If a
pressure washer is not available, surface can be
scrubbed with a stiff, short bristle broom or brush and
then rinsed with a garden hose. Note: For best
results, a pressure washer is highly recommended.
This product is designed to loosen dirt and grime to
make removal with a pressure washer easier. Using
a garden hose will not clean the surface as
thoroughly as a pressure washer. Heavily soiled
surfaces may require a second application. Allow
surface to dry before applying MasonryDefender
sealers.

Coverage Rate: Each gallon of diluted cleaner will
clean approximately 150 sq. ft. per gallon depending
on surface porosity. One 3 LB container makes 6
gallons of cleaning solution and cleans up to 900 sq.
ft.

Storage and Disposal: Dispose of this container
and any unused product in accordance with all
federal, state, and local regulations.

Cleanup: Clean tools immediately after each use
with soap and water.