Masonry Waterproof & Sealer - Masonry Defender
136
product-template-default,single,single-product,postid-17015,theme-bridge,bridge-core-1.0.5,woocommerce,woocommerce-page,woocommerce-no-js,ajax_fade,page_not_loaded,,no_animation_on_touch,columns-4,qode-theme-ver-18.1,qode-theme-bridge,qode_header_in_grid,wpb-js-composer js-comp-ver-6.0.2,vc_responsive

Products

All Purpose Concrete, Brick & Stone Sealer

MasonryDefender® All Purpose Concrete, Brick, & Stone Sealer is a penetrating, silane-siloxane water repellent that bonds beneath the surface of concrete and masonry surfaces to protect against the damaging effects of water. This product can be used on any exterior, above-grade bare concrete or masonry surface including brick, concrete, stone, cultured stone, sandstone, limestone, granite, & more. It is breathable, non-film forming, and will not alter surface color or appearance to most surfaces when properly applied.

 

Categories: , ,

DESCRIPTION

If you have ever thought there was no way to prevent long-term damage to your brick, concrete and stone decorative elements, think again. A high-quality masonry sealer exists.

 

Masonry Defender’s All-Purpose Concrete, Brick & Stone Sealer is designed to penetrate deep into your porous stone surfaces to create a sealing barrier on your favorite walkways, stands and lawn decorations.

 

Our formula works on brick, concrete, stone, cultured stone, sandstone, limestone, granite and numerous other porous outdoor surfaces. By establishing a protective barrier with sealant, you will help prevent water damage and many of the harsh effects of freezing water in the winter, such as heaving and cracking.

 

To keep your masonry waterproof, invest in a quality sealant from MasonryDefender.

 

PRODUCT DESCRIPTION

MasonryDefender® All Purpose Concrete, Brick, & Stone Sealer is a penetrating, silane-siloxane water repellent that bonds beneath the surface of concrete and masonry surfaces to protect against the damaging effects of water. This product can be used on any exterior, above-grade bare concrete or masonry surface. It is breathable, non-film forming, and will not alter surface color or appearance to most surfaces when properly applied.

 

WHERE TO USE ALL PURPOSE MASONRY AND CONCRETE SEALER

This product is suitable for use on most exterior, above-grade, concrete or masonry surfaces including:

brick
concrete
stone
cultured stone
sandstone
limestone
granite
and more

 

This product is not suitable for below-grade or interior masonry and concrete surfaces.

 

HOW TO USE ALL PURPOSE CONCRETE, BRICK & STONE SEALER

DIRECTIONS FOR USE

Before use, read all directions for preparation, application, and safety information. Always test each type of surface before application for suitability and desired results before proceeding with general application. Surface and air temperatures should be a minimum of 40°F and a maximum of 100°F for three hours following application. Do not apply to frozen or frost covered surfaces. Application must be to clean, sound, dry to slightly damp surfaces. Do not apply to wet or water saturated surfaces or when rainfall is expected within six hours.

 

Limitations:

Do not use on asphalt-based material and surfaces. Do not apply to painted surfaces. This product is not intended for interior use or for below-grade applications.

 

SURFACE PREPARATION

Surface and air temperatures should be a minimum of 40°F and a maximum of 100°F for three hours following application. Do not apply to frozen or frost covered surfaces. Application must be to clean, sound, dry to slightly damp surfaces. Do not apply to wet or water saturated surfaces or when rainfall is expected within six hours.

 

STEP 1: CLEAN SURFACE

Clean surface with MasonryDefender All Purpose Masonry & Concrete Cleaner per label instructions. If oil or grease stains are present, use a quality degreasing cleaner available at most hardware or home improvement stores. If desired, a pressure washer can be used to rinse cleaner off and may result in a cleaner surface than rinsing with a garden hose alone. Allow surface to dry, waiting a minimum of 6 hours before proceeding to next step.

 

STEP 2: APPLY SEALER

Vertical: Apply from bottom using a low pressure sprayer (10-25 psi). Apply from bottom up using a low pressure sprayer (10-25 psi) with a fan type nozzle, or by roller with a minimum 3/8” nap. Flood surface until excess runs down six to eight inches below spray or roller pattern. To assure optimum performance, a wet on wet application is recommended; apply second coat within three to five minutes. A wet treated surface may be agitated with a soft bristle brush to ensure even distribution and greater penetration.

 

Horizontal Surfaces:

Apply a single application of All Purpose Concrete, Brick, & Stone Sealer with a low pressure pump-up garden sprayer so that the surface remains wet for two to three minutes before final absorption. Avoid puddling or ponding; brush or broom to spread material until it thoroughly penetrates the surface.

Coverage Rate:

Coverage rates will typically range from 80-150 sq. ft. per gallon depending on surface porosity. Do not thin product.

Note:

Over-application of material may cause darkening of surface.

Storage and Disposal:

Do not store below 32° F. Dispose of this container and any unused product in accordance with all federal, state, and local regulations.

Dry Time:

Surface will be dry in 2-6 hours, depending on temperature and humidity. Allow 24 hours before driving on surface.

Cleanup:

Clean tools immediately after each use with soap and water.

 

FREQUENTLY ASKED QUESTIONS (FAQ)

Can I use this on a below-grade surface?

For best results, our all-purpose sealant should only be used on above-grade surfaces.

 

Will this change the color of the stone on my fountain or brick wall?

No. When properly applied, our product does not change the color of the base material or alter the appearance in any way.

 

Can I apply this directly to my bricks or stones?

Yes, as long as the surface is clean and free of any dirt, debris, mold, or mildew. Otherwise, we strongly recommend the use of MasonryDefender All Purpose Masonry & Concrete Cleaner before application of the sealant. Use a pressure washer or a garden hose with an adjustable nozzle to rinse the cleaner off. Allow surfaces to dry a minimum of six hours before you move on to application of the sealant.

 

How do I apply the sealant?

When working on a vertical surface, start from the bottom and work your way up. For best results, use a pump-up garden type sprayer and apply to an area until the sealant is running down approximately six inches. By starting from the bottom, you can avoid streaking and ensure proper penetration. 

 

Do I need two coats?

Yes, for best results, apply a second coat within a few minutes after the first coat. If the entire project will take longer than five minutes, break the project into segments. 

 

Can I apply horizontally?

Yes. When applying horizontally, use a garden sprayer to keep the surface wet for two to three minutes before allowing for final absorption. If you notice puddling or ponding, use a brush or broom to spread sealant to new areas until it penetrates the surface.

 

How long until my stones dry?

The surface will dry in two to six hours but do not drive on a treated surface for at least 24 hours.

 

ADVANTAGES

  • Water-based – Safe for the Environment
  • Silane-siloxane – Non Film-Forming Sealer Penetrates Deep Into Masonry Pores & Lasts
  • No Sheen – Invisible Protection for Your Concrete & Masonry
  • Clear, Penetrating Water Repellent Waterproofs & protects Exterior Surfaces

 

WARRANTY INFO

For additional warranty information, see the MasonryDefender All-Purpose Concrete, Brick & Stone Sealer datasheet.

 

MANUFACTURER:

SaverSystems
800 S 7th St. Richmond, IN 47374
800-860-6327
masonrydefender.com

 

For more information, see the MasonryDefender All-Purpose Concrete, Brick & Stone Sealer datasheet.